Amongst the many big-name tractor brands, you have likely come across a few older John Deer models in your search that might be worth purchasing. For more than 65 years, John Deere has been manufacturing trustworthy tractors that are known as being some of the best in the agricultural industry.
However, a brand name isn’t the only thing you need to consider. When you need to buy a used tractor, you need to evaluate if it will be reliable and cost-effective with readily available replacement parts.
If you haven’t already had a look at the John Deere 9200, you might want to. For the most part, the John Deere 9200 meets these expectations, but that doesn’t mean it has no problems. Since you might not be aware of the issues you could face with this tractor, we have chosen to discuss the four most common problems found with it.
Table of Contents
- 3 Common Problems Seen With John Deere 9200 Tractors
- What Does The John Deere 9200 Tractor Do Right?
- What Do Reviewers Think Of The John Deere 9200 Tractor Model?
- How Much Do The John Deere 9200 Tractors Cost?
3 Common Problems Seen With John Deere 9200 Tractors
We know how frustrating it can be to purchase a used tractor that is not up to standard. Have a look at the common problems seen with the John Deere 9200 tractors below.
If you know about the problems, you will be able to make an educated decision about if it’s the right tractor for your purposes. We understand how frustrating it can be to purchase a used tractor that is not up to standard.
1. The 10.5 Engines Have Issues
When purchasing a used tractor, one of the biggest things you need to consider is if the model is known to experience engine problems.
Since John Deere 9200 models are still relatively expensive despite their age, it’s important to evaluate the engine problems that have been known to occur.
The John Deere 9200 models came with two engine options. The 12.5 is reliable, but the 10.5 experienced many problems.
Engine problems can lead to power loss, which is particularly frustrating when you need it for farming-intensive tasks. Additionally, engine problems can also lead to overheating, high fuel consumption even when performing low-powered jobs, and issues with starting.
Let’s discuss a few common problems that were prevalent with the John Deere 9200 models equipped with the 10.5 engines. For example, the exhaust valves fell apart, and the valves on the cylinder fell apart and into the cylinder, which caused pistons to break.
Numerous other models have also had piston issues that have caused the tractors to be out of commission while drivers have tried to source spare parts.
Additionally, a part that caused the engine problems was the head gasket. With a few 9200 models, the head gaskets leaked coolant internally, resulting in the heads needing to be planed and the crank bearings fixed or replaced.
2. Problems With The Fuel System
The fuel system in a tractor is crucial. Without a properly functioning fuel system, you will experience many problems. Some of the common issues seen with tractors fuel systems include failing fuel pumps, dirty fuel filters, and faulty fuel injectors.
A failing fuel pump causes the tractor to not start; a dirty fuel filter will restrict the flow of gasoline to the engine, which often causes the tractor to suddenly lose power and speed or causes a jerking motion.
Additionally, faulty fuel injectors will affect the performance of your tractor and poor idling.
With the John Deere 9200 models, a few of them have experienced fuel system issues.
For example, some have been very particular about how they function with certain fuels, which has led to owners going through many fuel filter replacements. When the filters have been replaced, owners have also had difficulty getting the tractors to start again.
Additionally, some 9200 owners have experienced water in their fuel due to their injector cups breaking, which allowed fuel and coolant to mix.
This issue caused their tractors to display problem codes. Upon investigation, it was determined that metal shaving was found inside some of the filters. This had likely occurred because of bearings beginning to break.
3. Axle Bearing Issues
Unfortunately, a typical mechanical problem seen with tractors is various issues with axles. Often the common reasons for axle failure on a tractor are worn or broken CV joints, worn or damaged axle bearings, mechanical failure, design flaws, and poor driving techniques.
Some John Deere 9200 tractor models have experienced significant trouble with axle bearings. Many owners have stated that the axle bearings on these tractors are too light duty, and this has caused grinding.
Additionally, others had said that their 9200 tractors lost their front axle bearings before 1,800 hours were logged and the rears shortly afterward before 2,000 hours were logged.
What Does The John Deere 9200 Tractor Do Right?
Buying a used tractor can be an incredibly frightening experience. If you’re not careful, you can end up with a tractor that is expensive to run, difficult to maintain, or worst of all, nothing more than a lawn ornament.
Fortunately, if you’re interested in the John Deere 9200 tractor, you will be pleased to learn that there are a few positives to owning one of these tractors. So when you’re deciding if you should buy this specific model, keep in mind the problems we spoke of above and the positives we have discussed below.
- Reliable 12.5 engines: Unlike the 10.5 engines that are present in a few of the 9200 models, the 12.5 engines are known to be reliable. Few owners have experienced issues with their 12.5 engines, with many praising how reliable they are. These engines have proven to log many hours without breaking when maintained.
- Impressive horsepower capabilities: John Deere tractors have impressive horsepower capabilities. The older 9200 models are no different; numerous owners have found these tractors to be more than capable of completing a range of different activities in the farming industry.
- Don’t require frequent repairs: Apart from the issues we spoke of that a few 9200 owners have experienced, these tractors are well known for not requiring many repairs or parts replacements. Many owners have logged thousands of hours without any issues transpiring.
What Do Reviewers Think Of The John Deere 9200 Tractor Model?
Most John Deere 9200 owners have had positive experiences owning the 9200 tractor models, but that doesn’t mean there have not been a few disgruntled owners.
As you now know, these tractors have their fair share of problems. Yet, we thought it prudent to provide you with a few first-hand accounts of reviews from people who actually own or have owned a 9200 model.
One John Deere 9200 tractor owner had many problems with his engine system. He said:
“The exhaust valves fell apart. On cylinder 6, the valve seat fell apart inside the cylinder, wrecking the piston and the valve. There is evidence that the rest of the valves are ready to do the same thing.”
Another 9200 model owner voiced concerns surrounding its capabilities. He stated:
“The stock hitch on this tractor is made for pulling and it is not rated very high on vertical load capacity. That’s why you might want to check that first and make sure it matches your cartload.”
How Much Do The John Deere 9200 Tractors Cost?
Related Article: 5 Problems with Challenger Tractors (#5 Makes Frustrating)