3 Effective Ways To Fix Toilet To Floor Without Screws

Ways To Fix Toilet To Floor Without Screws

Whether you have plumbing skills or not, you need to determine the best ways to fix your toilet on the floor to prevent bad smells and leakages. But how do you do so without using screws? 

The truth is that there are several options apart from screws you can employ to fix your toilet to the floor. This includes anchor bolts & dowels using glue, and employing dowels. The method you select must be effective since the toilet bowl isn’t only a functional device but also an interior decoration. 

In this article, we embark on three effective approaches you can employ to fix your toilet to the floor without using screws. 

Method 1: Installation Toilets with Glue

Fixing the toilet to the floor with glue is among the most popular approaches in the industry. This method offers effective results with the below advantages:

  • It’s reliable thanks to the application of modern materials. 
  • It provides a clean installation without dust or noise. 
  • There is absolute safety.
  • The method is easy to manage, even for beginners.
  • You can fix your toilet from any material.

The only disadvantage to this approach is that you can’t use the toilet until the glue has fully solidified. This might be days before you use the toilet. 

You’ll require virtually no tools to complete this task. Just ensure that you select very effective glue for durability. Here, we recommend J-B Weld ClearWeld glue

Follow the steps below to fix your toilet with glue:

Fitting and Marking

You don’t have to mark holes here. Just ensure that your chosen location meets your expectations and wishes. Trace the toilet base outline using a marker or pencil. You also need to use a tape to measure the distance to the wall. 

Preparing The Surface

For the glue to adhere well to your floor, you need to ensure that it’s clean and smooth. We recommend using fine-grained sandpaper to level the bowl surface. You can then proceed to the floor. 

If your floor has tiles, degrease it with ammonia and then wipe it dry using a napkin. In some instances, sand your floor covering using sandpaper. However, you should do it carefully. 

Gluing The Toilet To The Floor

It’s now time to apply an adhesive or glue to the toilet bowl’s edge. Remember to employ just the right glue amount. Using too little glue won’t offer proper reliability. On the other hand, excessive glue ruins the appearance of your repair. 

To begin with, lift your prepared toilet bowl and transfer it to the installation site. Work with an extra person to help you lift it easily and put it exactly in the selected location. 

Additionally, sprinkle the flooring around your bowl with soap and water to ensure the room’s cleanliness and remove excess adhesive. Use a spatula to remove glue streaks. 

Allow the toilet some time for the seam to solidify completely. Never touch the toilet until it dries fully. 

Method 2: Using Anchor Bolts and Dowels 

This approach is perfect for toilet models with mounting holes in the bowl base. However, before you start anything, ensure you have the tools below:

  • Electric drill and drill bits
  • A roulette
  • A pencil and marker
  • A hammer and core

Once you have acquired the tools, you can go through the below steps to fix your toilet:

  1. To begin with, you should design the location of your toilet accurately and carefully. Determine how convenient it’ll be to use it, approach it, and get to the right places, including flush designs and toilet paper. Also, evaluate how convenient connecting the whole equipment to your central water supply is convenient. Ensure the floor is flat and the bowl is stable and level. 
  2. Use a tape measure to accurately determine the plumbing equipment’s location. Use a marker or pencil to put marks on your floor via the mounting holes. 
  3. Remove the toilet bowl from marked areas. This is the time to make your pre-marked areas more visible. We recommend using crosses.
  4. At this point, you need to prepare a concrete and electric drill. If you have a tile floor, begin by making holes through it. Set your drill to low speed and perform all actions with extreme caution and care. Ignoring these measures will cause your tiles to be completely damaged or crack. 
  5. Use a concrete drill to make holes at full speed. We also recommend employing a perforator. 
  6. Take your time to clean debris and dust from the installation site. The debris and dust usually accumulate during preparation and drilling. You can then apply ammonia to degrease your surface. 
  7. Pick the dowels and insert them into drilled holes. The dowels should comfortably fit in the holes without delays and backlash. If they fail to fit, replace them with new ones. 
  8. Finally, you can install bolts through the dowel holes to secure and support your toilet. Carefully tighten the bolts. At this point, you can comfortably use your toilet without problems. 

Method 3: Installing In A Screed

This is a traditional approach that is used to fix toilets on the floor using cement. With this method, while pouring your floor, you leave a recess in which you place your bowl base. The toilet is installed, leveled, and finally filled with cement mortar. 

One benefit of employing this method is that it’s simple to operate. The toilet is also very stable after installation. You don’t need further strengthening to keep the toilet in position.

The only downside to this approach is that it becomes difficult to dismantle your toilet. In fact, the only option you’ll have is breaking it. 

Fixing your toilet to the floor using this method doesn’t require so much experience and knowledge as diligence and accuracy. And you don’t have to be a specialist to manage this task. 

Just ensure that you have the right tools and equipment. And, if possible, have someone to help you complete the task faster. 

Final Remarks

Fixing toilets isn’t a very difficult process that requires you to be a specialist. However, you’ll have to possess certain skills to accomplish it. 

To fix your toilet to the floor successfully without screws, go for any options we have suggested above: installing with glue, using anchor bolts & dowels, and installing in a screed. 

To begin with, you should acquire the correct tools and materials. Additionally, your work must comply with the available building codes and regulations. 

Finally, if you feel the work is too much for you, feel free to involve a specialist. They’ll charge some fee, but the work will be quality.


J-B Weld ClearWeld Glue

Installing A Toilet Bowl on A Tile Floor

How To Install A Toilet with A Hidden Mount